麻豆精品免费视频,国产99在线免费,国产网站欧美日韩免费精品在线观看

Product Parameter

Model	Studio Size? (DWH)mm	Dimension（DWH）mm
LRHS-5980-NGF	2300×1300×2000	Approx. 2800 x 2500 x 2400

Effective irradiance area	2000mm×1000mm
Light intensity range	150～250W/m2
spectral range	280～400nm
UVB/(UVA+UVB)	3～10%
inhomogeneity	≤±15%
Sample temperature range	60±5℃
Sample temperature uniformity	≤±5℃
Outer case material	1.2mm Cold rolled steel plate with plastic spraying on both sides
Inner box material	1.0mm thick SUS304 stainless steel, sunlight simulating fully reflective reflective film mounted on the side wall for secondary sealing and optical reflection control.
Insulation material	10mm Thickness High Quality Insulation Material
Controller	Siemens PLC Module + Touch Screen
Cooling method	Air-cooled/water-cooled refrigeration
Compressor	Taikang, France
Heating method	Nickel-chromium alloy electric wire type heater
standard configuration	UV probes, temperature sensors, lights, lead holes, etc.
security protection		Emergency stop button, sample surface temperature is too high, light source system fault alarm, power supply phase/undervoltage/overvoltage/leakage protection, fan overload, compressor overvoltage/overheat/overcurrent, heating wire over-temperature protection
Supply Voltage		AC380V±10% 50Hz
Power		20.0kW
operating environment		5℃～＋35℃ ≤75% RH
Note: 1、 the above data are measured in the use of ambient temperature of 25 ℃ and well-ventilated conditions 2、Can be customized according to the user’s specific test requirements. 3、This technical information is subject to change without prior notice.

Industry News

Constant Temperature and Humidity Test Chamber Detailed Introduction

The constant temperature and humidity test chamber, also known as a constant temperature and humidity tester, constant temperature and humidity experimental box, constant temperature machine, or constant temperature and humidity box, is a device used to test the performance of materials under various environmental conditions and to evaluate their resistance to heat, cold, dryness, and humidity.

How to choose a suitable IP protection level rain test chamber

The rain test chamber accurately simulates the IPX5 and IPX6 waterproof tests. The nozzle diameter is 6.3mm/12.5mm. The water flow rate is 12.5L/min or 100L/min. The water pressure is 30kPa/100kPa.

Exploring the Causes of Defrosting in Thermal Shock Test Chambers

Frost formation in a thermal shock test chamber is a sublimation phenomenon where moisture inside the chamber condenses under low-temperature conditions. But why does this happen? Is it simply because the chamber temperature is too low?

91欧美视频在线_国产精品看片资源_yy6080午夜_7777精品视频_日本三级2019_鲁丝一区鲁丝二区鲁丝三区_精品免费久久久_成人av在线不卡_精品日韩av一区二区_蜜臀av午夜一区二区三区

Ultraviolet Pre-treatment Machine